Samsung Galaxy A51 Render Exposure With Punch-hole Screen and Rear Quad Design

Foreign media 91Mobiles recently exclusively disclosed the possible configuration of the Samsung Galaxy A51 smart machine, and in a rendering video showed the machine’s front perforated screen and rear quad design. As can be seen from the rendering, the machine uses a centered front intake, which matches onLeaks’s explosive ness and is somewhat similar to the Galaxy Note 10. The 6.5-inch FHD-AMOLED screen has a slim border around it, providing an immersive media consumption and gaming experience.

Samsung Galaxy A51 Render Exposure With PunchIng Screen and Rear Quad Design

(From: OnLeaks, via 91Mobile)

Turning to the back of the body, the Galaxy A51 places the rear four-mode set in the upper left corner, the sensors are arranged in an L-shape, and the fourth is on the right side with the LED flash.

The phone’s back panel is a bit curved, with SAMSUNG-branded Logo in the middle, but you can’t see the incision of the rear fingerprint sensor, speculating that the Galaxy A51 will follow the previous generation’s off-screen fingerprint scheme.

The Galaxy A51’s power and volume buttons are located on the right side of the body, with a SIM slot on the left, a 3.5mm audio jack and speaker grille at the bottom, and a built-in 4000mAh battery that supports fast charging via the USB Type-C connector.

Samsung Galaxy A51 Render Exposure With PunchIng Screen and Rear Quad Design

On the camera side, the Galaxy A51 is equipped with a combination of front-facing 32MP, rear 48MP master camera, 12MP wide angle, 12MP, 2X-ray-long-focus, 5MP depth sensor.

The machine is said to be 158.4 x 73.7 x 7.9 mm in size and runs one UI 2.0 software based on Android 10 customization.

Finally, based on the information exposed in the Geekbench database, the Galaxy A51 features the Exynos 9611 SoC, supplemented by 4GB of RAM plus 64 / 128GB ROM.

Add a Comment

Your email address will not be published. Required fields are marked *