The well-known dismantling site iFixit took the AirPods Pro and brought with it a detailed dismantling. What’s happening inside the AirPods Pro compared to The AirPods?
The name Pro means
Active noise reduction, permeable mode
Apple self-developed H1 wireless chip that supports Bluetooth 5.0
Each AirPods Pro weighs 5.4g and the charging case weighs 45.6g
AirPods Pro 充电盒的设计也是白色，只是更扁一些。
AirPods 提供了 3 对硅胶耳塞，长度更短
The mold model of the charging case is A2190 and the mold model of the headset is A2083 and A2084, respectively.
New charging contacts at the bottom
Cut the headset open with a sharp blade after heating
There’s no surprise inside with the adhesive.
This is battery, 3.7V, made in Germany. This battery is similar to the one in The Galaxy Buds, which is modeled cp1254 and the CP1154 in the AirPods Pro
Apple H1 chips and other chips
Continue to cut the bottom of the AirPods Pro
Finally, it’s the charging case.
The chips above include:
Orange: Broadcom 59356A2KUBG Charging Module
Yellow: Texas Instruments 97A4PQ1
Green: NXP 610A3B KN3308, when possible charging IC
AirPods Pro 充电盒的电池为 1.98Wh。AirPods 2 中的电池为 1.52Wh，Galaxy Buds 为 1.03Wh
Disassembled, serviceability 0 points.