Galaxy A70e Render Exposure With Rear Three-Camera and WaterDrop Notch Screen

Earlier, it was reported that Samsung was developing a successor model for the Galaxy A71. Today, renowned whistleblower @OnLeaks shared a rendering of the CAD-based Galaxy A70e model with CompareRaja. It is known that the machine uses a drop-type notch screen with a rear three-camera, which is configured to be somewhat smaller than the Galaxy A71 (the latter uses a punched screen and 64MP quad camera).

Galaxy A70e Render Exposure With Rear Three-Camera and WaterDrop Notch Screen

(Instagram via 91Mobiles)

Rumor has it that the Galaxy A70e is equipped with a 6.1-inch display with a thick border around it, with the front camera taking up only a fraction of the water drop-type notch gap.

The back of the body features a vertical, vertical, back-and-three-camera combination with a fingerprint scanner in the middle position, and both the volume and power keys are on the right side of the body.

The SIM card slot is located on the left side of the body and the 3.5mm headphone jack is located on the top edge. At the bottom are the micro-USB charging/data connector and speaker grille.

Galaxy A70e Render Exposure With Rear Three-Camera and WaterDrop Notch Screen

(Galaxy A71e will be available in black and white)

Other specifications for the Galaxy A70e are not yet known, but given that it only has an e-tail, there is speculation that it will not be far from the Galaxy A71.

Examples include the 6.7-inch FHD plus Super AMOLED Infinity-O display, the 2.2GHz octa-core processor, 6 / 8GB of RAM, and 128GB RO (microSD storage expansion is supported).

Galaxy A70e Render Exposure With Rear Three-Camera and WaterDrop Notch Screen

For photo ops, the Galaxy A71 features a 4-camera combination of 64MP master cameras with a depth of 5MP, 5MP macro, and 12MP wide-angle, with a 32MP single-camera on the front.

It also has a 4500mAh battery (25W fast charging) and, like the Galaxy A51, pre-installed OneUI 2.0 software based on Android 10.